Lenoxx Electronics Clock Radio CR 500 User Manual

AM / FM CLOCK RADIO  
MODEL CR-500  
OPERATING INSTRUCTIONS  
EASY TO SET CLOCK CONTROLS  
RECEIVES AM/FM BROADCASTS  
ELECTRONIC DIGITAL CLOCK  
PM & AUTO INDICATORS  
WAKE-UP TO RADIO OR BUZZER ALARM  
SNOOZE FUNCTION(FOR EXTRA 9 MINUTES SLEEP)  
SLEEP TO RADIO (WITH AUTOMATIC SHUT OFF)  
PLEASE READ CAREFULLY BEFORE USE  
IB-CR500-WM-E-123003  
 
ADDITIONAL SAFETY INSTRUCTIONS  
1. Power Sources - The appliance should be connected to a power  
supply only of the type described in the operating instructions or  
as marked on the appliance.  
2. Wall or Ceiling Mounting - The appliance should not be mounted  
to a wall or ceiling.  
3. Object and Liquid Entry - Care should be taken so that objects  
do not fall and liquids are not spilled into the enclosure through  
openings.  
4. Servicing - The user should not attempt to service the appliance  
beyond that described in the operating instructions. All other  
servicing should be referred to qualified service personnel.  
5. Do not connect FM antenna wire to any outdoor antenna.  
LOCATION OF CONTROLS  
SLEEP  
FRONT VIEW  
BUTTON  
SNOOZE  
HOUR SET  
ALARM/OFF  
BUTTON  
BUTTON  
BUTTON  
MINUTE SET  
BUTTON  
TIME SET  
BUTTON  
PM  
INDICATOR  
VOLUME  
CONTROL  
BAND  
SWITCH  
AUTO (ALARM)  
INDICATOR  
TUNING  
CONTROL  
DIAL SCALE  
CLOCK DISPLAY  
BACK VIEW  
AC POWER CORD  
FUNCTION SWITCH  
(ALARM/AUTO/OFF/ON)  
FM ANTENNA WIRE  
2
IB-CR500-WM-E-123003  
 
OPERATING INSTRUCTIONS  
Powering Up  
Plug the AC power cord into a 120V, 60Hz electrical outlet. The clock  
display will light up and flash indicating the power is on.  
NOTE: This cord is polarized. This means the cord will only fit one  
way into the socket or wall outlet. If it does not fit, do not force  
it, just reverse it and try again.  
Setting the Clock  
1. Press the TIME set button together with the HOUR set button until the  
display shows the desired hour.  
2. Press the TIME set button together with the MINUTE set button until  
the display shows the desired minutes.  
NSOeTEt:tWinhegn thetPhMeindicAatolrais rofmf, the tTimeimis AeM.  
1. Use the ALARM/OFF button to check the alarm time.  
2. Press the ALARM/OFF button together with the HOUR set button  
until the display shows the desired alarm hour time.  
3. Press the ALARM/OFF button together with the MINUTE set button  
until the display shows the correct alarm minutes.  
4. Make sure the PM lamp is off if you want the clock to wake you in the  
morning.  
5. Release the ALARM/OFF button, the clock display will show the  
normal time of day.  
NOTE: Again check the PM indicator. If you want the radio to wake  
you in the morning, the PM lamp should be off on alarm time  
(when pressing ALARM/OFF button). To change PM to AM  
time, advance time 12 hours. To have clock wake you up,  
slide the FUNCTION switch to AUTO or ALARM position(s).  
Playing the Radio  
1. Slide the FUNCTION switch to ON position.  
2. Slide the BAND switch to either AM or FM.  
3. Turn the TUNING control to your desired station.  
4. Adjust the VOLUME control to your favorite listening level.  
5. Slide the FUNCTION switch to OFF position to shut off the radio.  
GETTING BETTER RADIO RECEPTION:  
For best AM reception, rotate the radio a small amount or position it  
near the window.  
For best FM reception, unwrap and fully extend the FM antenna wire.  
WARNING: Do not connect the FM antenna to an outdoor antenna.  
IB-CR500-WM-E-123003  
3
 
OPERATING INSTRUCTIONS  
Waking up to Radio (Alarm)  
1. Set the alarm time as previously instructed.  
2. Select your desired AM or FM broadcast by following the procedure  
of Playing the Radio.  
3. Make sure the VOLUME control is set loud enough to wake you up.  
4. Slide the FUNCTION switch to AUTO position and the AUTO lamp  
will light up.  
NOTE: Your set is now ready to turn on automatically at your  
selected alarm time.  
5. When alarm sounds, to get 9 minutes of extra sleep, press the  
SNOOZE button.  
6. To shut off the alarm, press ALARM/OFF button.  
Wake to Buzzer (Alarm)  
1. Set the alarm time as previously instructed.  
2. Slide the FUNCTION switch to ALARM position. The AUTO  
indicator will light.  
3. The buzzer alarm is now set to turn on automatically at the  
selected alarm time.  
4. When buzzer sounds, to get 9 minutes of extra sleep, press the  
SNOOZE button.  
5. To shut off the alarm, press ALARM/OFF button.  
Snooze Control  
When this set has waken you up and you wish to sleep a few minutes  
more, simply press the SNOOZE button. The radio or alarm will go off  
for 9 minutes and then come on again. This is repeated in a row.  
Alarm Off  
1. Press ALARM/OFF button. This will shut the alarm for that day only.  
Next day the set will wake you again at the same time.  
2. Slide the FUNCTION switch to OFF position and the alarm function  
is off until you re-adjust the FUNCTION switch to AUTO or ALARM.  
Sleep Control  
The SLEEP control will allow the radio to play 59 minutes (or 1 hour and  
59 minutes) before the radio turns itself off.  
1. Press the SLEEP button, the display will show 59 minutes and the  
radio will start to play.  
2. Holding the SLEEP and MINUTE SET buttons down, the display  
will count down. Release the buttons when the display shows your  
desired amount of time you want the radio to play before shutting  
itself off.  
3. Pressing the SLEEP button, the HOUR set button, and the MINUTE  
set button all simultaneously down, the required sleep time will be  
changed to 1 hour and 59 minutes. You may reduce the sleep time  
by following the above Step 2.  
4. To turn the radio off before the playing time has expired,  
simply press the SNOOZE button.  
NOTE: The sleep function will not affect the wake-up operation of the  
clock if the FUNCTION switch is in AUTO or ALARM position.  
In the morning, the radio or buzzer will wake you up if FUNCTION  
switch is in the AUTO or ALARM position.  
IB-CR500-WM-E-123003  
4
 
TROUBLE SHOOTING  
(Helpful Hints)  
SHOULD YOUR SET EXHIBIT A PROBLEM, CHECK THE  
FOLLOWING BEFORE SEEKING SERVICE.  
SYMPTOM  
CAUSE  
SOLUTION  
AM or PM not set  
correctly. Is alarm  
time set in AM range  
(PM Lamp off)?  
Advance the clock 12  
hours.  
Alarm does not  
come on in the  
morning.  
FUNCTION switch  
is in OFF position. Is  
the AUTO Lamp off?  
Set the FUNCTION  
switch to AUTO or  
ALARM position.  
FM antenna wire is  
not extended.  
Extend FM antenna  
wire.  
Station not tuned in  
properly.  
Tune to desired station  
carefully.  
FM is distorted  
and weak.  
Weak broadcast  
station.  
Turn to a stronger  
Station.  
Rotate the set to  
Signal is blocked.  
receive better signal.  
Noise or weak  
sound on AM  
broadcasts.  
Turn the radio for better  
AM reception or bring  
the set near a window.  
External  
interference.  
FUNCTION switch is Slide the FUNCTION  
in the OFF position. switch to ON position.  
No sound.  
VOLUME control set Rotate VOLUME control  
to minimum position. for desired sound.  
Set the clock and alarm  
The clock is not set.  
time.  
The clock is  
flashing.  
A power failure has  
occurred.  
Reset the clock alarm  
time and time of the day.  
Connect the sets AC  
cord and make sure  
outlet has power.  
The sets AC cord is  
not connected.  
Clock is dead.  
LENOXX reserves the right to make design and specification  
changes for product improvement.  
PROTECT YOUR FINE FURNITURE!  
WE RECOMMEND A CLOTH OR OTHER PROTECTIVE MATERIAL  
BE PLACED UNDER THE SET WHEN PLACING IT ON SURFACE  
WITH A NATURAL OR LACQUER FINISH.  
IB-CR500-WM-E-123003  
5
 
SPECIFICATIONS  
Power source:  
Dimensions:  
AC 120V, 60Hz, 5W  
5 1/2" (Length)  
2 5/8" (Height)  
5" (Depth)  
Frequency range: FM 88 - 108MHz  
AM 530 - 1700kHz  
LIMITED WARRANTY  
We warrant this product to be free from defects in material  
and workmanship under normal use for a period of 90 days  
after purchase and we will repair it free of charge or replace  
it at no charge, should it become defective under this  
warranty, providing you submit proof of purchase (sales slip)  
with the set.  
During the initial 90 day period after original purchase,  
we will service or exchange, at no charge, the set that is  
returned to LENOXX ELECTRONICS CORP. After the initial  
90 day period expires, and for a period of 12 months from  
original purchase, we will repair the unit covering any part(s)  
that need to be replaced at no charge, but will charge for the  
cost of labor, return postage paid by Lenoxx.  
This warranty does not apply to any products which have  
been subject to misuse, neglect or accident. This warranty  
does not cover broken headphones or cabinet. UNDER NO  
CIRCUMSTANCES WILL LENOXX ELECTRONICS CORP.  
BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL  
DAMAGES. Some states do not allow the exclusion or  
limitation of incidental or consequential damages, so the  
above limitations or exclusions may not apply to you.  
This warranty gives you specific legal rights, and you may  
also have other rights which vary from state to state. The  
following charges apply to repairs beyond the warranty  
period: $3.00. Be sure to pack carefully and return postage  
paid insured together with your money order (personal checks  
will not be accepted) and sales receipt to:  
LENOXX ELECTRONICS CORP., 2 GERMAK DRIVE,  
CARTERET N.J. 07008  
For customer service  
Dial 1-800-315-5885  
(MONDAY - THURSDAY 09:00 AM - 05:00 PM, FRIDAY 09:00 AM - 01:00 PM EST)  
or Visit Our Website: http://www.lenoxx.com  
© 2004 LENOXX ELECTRONICS CORP.  
2 GERMAK DRIVE  
CARTERET, N.J. 07008  
MADE & PRINTED IN CHINA  
IB-CR500-WM-E-123003  
6
 

Lenoxx Electronics Air Conditioner 15CHAX User Manual
Lightolier Indoor Furnishings 1003R User Manual
Lincoln Electric Welding System IM917 A User Manual
Link electronic Switch ASW 822 User Manual
Magenta Home Theater System XR2000 User Manual
Marantz MP3 Player PMD570 User Manual
McCulloch Lawn Mower 966564001 User Manual
McCulloch Lawn Mower PM6556D User Manual
Meade Telescope ETX LS User Manual
Memorex Computer Drive M Flyer User Manual