Lenoxx Electronics CDR1906 User Manual

CD PLAYER  
DUAL ALARM DIGITAL CLOCK RADIO  
MODEL CDR-1906  
OPERATING INSTRUCTIONS  
DUAL ALARMS - PERFECT FOR WEEKDAYS & WEEKENDS  
LARGE LCD DISPLAY FOR CLOCK, RADIO & CD PLAYER  
PLAYS ALL MUSIC COMPACT DISCS, CD-R & CD-RW  
FULLY PROGRAMMABLE CD PLAYER WITH REPEAT PLAY  
ANALOG AM/FM TUNER WITH DIGITAL DISPLAY  
WAKE UP TO CD, RADIO OR BUZZER ALARM  
EASY TO SET CLOCK & ALARM  
BATTERY BACK-UP(9V BATTERY, NOT INCLUDED)  
PLEASE READ CAREFULLY BEFORE USE  
IB-CDR1906(AD-CL)-WM-E-012105  
IB-CDR1906(AD-CL)-WM-E-012105.pmd  
1
2/3/2005, 12:08 PM  
IMPORTANT SAFETY INSTRUCTIONS  
15. Power Sources - This product should be operated only from the type of power  
source indicated on the marking label. If you are not sure of the type of power supply  
to your home, consult your product dealer or local power company. For products  
intended to operate from battery power, or other sources, refer to the operating  
instructions.  
16. Overloading - Do not overload wall outlets, extension cords, or integral convenience  
receptacles as this can result in a risk of fire or electric shock.  
17. Servicing - Do not attempt to service this product yourself as opening or removing  
covers may expose you to dangerous voltage or other hazards. Refer all servicing  
to qualified service personnel.  
18. Safety Check - Upon completion of any service or repairs to this product, ask the  
service technician to perform safety checks to determine that the product is in  
proper operating condition.  
Do not apply oil or petroleum products or solvents to any part of this set.  
CAUTION  
Use of controls or adjustments or performance of procedures other than  
those specified herein may result in hazardous radiation exposure.  
This compact disc player is classified as CLASS 1 LASER PRODUCT as  
stated on the bottom of the set.  
Please read important information displayed on the rating plate located on the  
bottom enclosure before connecting to AC Mains or any operation.  
2
IB-CDR1906(AD-CL)-WM-E-012105  
IB-CDR1906(AD-CL)-WM-E-012105.pmd  
3
2/3/2005, 12:08 PM  
1. Setting the Clock  
HOUR button  
MINUTE button  
DIMMER button  
CLOCK SET  
button  
Large display for  
clock, radio & CD play  
Connect the AC power cord into a live wall outlet.  
1
If the plug of the AC power cord does  
not match your outlet, do not force it.  
Reverse it and try again. This plug is  
polarized and only fits one way into  
the wall outlet.  
Clock display will show 12:00 flashing.  
In case you want to reduce the brightness of the  
display when you are sleeping, you can press the  
DIMMER button.  
2
3
Hold the CLOCK SET button  
down, and press the HOUR  
button, until the right hour time  
CLOCK  
SET  
HOUR  
is shown in the display.  
PM will show in the  
display for PM time.  
Hold the CLOCK SET button  
CLOCK  
SET  
MINUTE  
down,  
and  
press  
the  
MINUTE button until the right  
minutes time shows in the  
display.  
Example: 10:26 P.M.  
NOTE: To change PM to AM time, advance the clock time 12 hours.  
3
IB-CDR1906(AD-CL)-WM-E-012105  
IB-CDR1906(AD-CL)-WM-E-012105.pmd  
4
2/3/2005, 12:08 PM  
2. Setting the Alarm Time  
This set has dual alarms. You may set ALARM 1 to wake you at a certain time, or  
ALARM 2 to wake you at a different time, or ALARM 1+2 - both alarms will sound  
at the time you set.  
This feature is useful for a husband & wife waking up at  
different time or a single person who likes to wake up at  
different time during weekdays and weekends.  
To set ALARM 1, slide the ALARM switch to position 1,  
the words ALARM 1will show in the display.  
To set ALARM 2, slide the ALARM switch to position 2,  
the words ALARM 2will show in the display.  
SLEEP button  
HOUR button  
LEFT SIDE VIEW  
MINUTE button  
ALARM SET button  
BUZZER/AUTO/  
OFF/ON switch  
ALARM switch  
(1,2,1+2)  
OFF  
ON  
AUTO  
Slide the BUZZER/AUTO/OFF/ON switch to  
BUZZER or AUTO position. Press the ALARM SET  
button to check the alarm time.  
1
BUZZER  
Press the ALARM SET button together with the HOUR button until the display  
2
3
4
shows the desired alarm hour time.  
Press the ALARM SET button together with the MINUTE button until the display  
shows the correct alarm minutes.  
Release the ALARM SET button, the clock display will show the normal time of day.  
NOTE 1: When the ALARM switch is in the ALARM 1+2 position, you cant set the  
ALARM time.  
NOTE 2: If you want this set to wake you up in the morning, the letters PMshould  
not show on alarm time (when pressing ALARM SET button), this means  
AM (morning time). To change PM to AM time, advance the clock time 12  
hours. To have this set wake you up, slide the BUZZER/AUTO/OFF/ON  
switch to AUTO or BUZZER position. Auto position will wake you up to CD  
or RADIO. Buzzer position will have a sound buzzer to wake you up.  
NOTE 3: To wake to ALARM 1 time, slide ALARM switch to position 1.  
To wake to ALARM 2 time, slide ALARM switch to position 2.  
To wake to both times, slide ALARM switch to position 1+2.  
For additional clock & alarm points, see pages 11 and 12.  
4
IB-CDR1906(AD-CL)-WM-E-012105  
IB-CDR1906(AD-CL)-WM-E-012105.pmd  
5
2/3/2005, 12:08 PM  
3. Playing a CD  
CD PLAY/PAUSE  
button  
CD STOP button  
Open the disc door  
by lifting here  
BUZZER/AUTO/  
OFF/ON switch  
(on the left side)  
FM/AM/CD switch  
Connect the AC power cord (see Setting the Clock).  
AM  
Slide the FM/AM/CD FUNCTION  
switch to CD position and the  
B U Z Z E R / A U T O / O F F / O N  
switch to ON position. Two  
CD  
FM  
1
2
OFF  
AUTO  
flashing zeros “  
will show  
in the display, then  
.  
ON  
BUZZER  
Lift either side of the CD DOOR  
to open it and place a CD in the  
CD compartment. The label side  
of the CD should face upward.  
Close the CD DOOR by  
pushing it down. The CD display  
will show the total track  
numbers of the disc.  
3
4
Total track numbers  
of the disc  
Press the CD PLAY/PAUSE  
button. The player will play all  
the tracks once. The CD display  
will show the track number of  
the song currently playing and  
the play symbol “ ” .  
PLAY  
PAUSE  
CD Track number  
Remember to slide the BUZZER/AUTO/OFF/ON switch to BUZZER or AUTO  
position after listening, so that the buzzer alarm, CD music or radio will wake  
you up at your preset time. Make sure the volume control is adjusted loud  
enough to wake you up.  
5
IB-CDR1906(AD-CL)-WM-E-012105  
IB-CDR1906(AD-CL)-WM-E-012105.pmd  
6
2/3/2005, 12:08 PM  
4. More about CD operation  
Use these buttons for additional operations  
CD PLAY/PAUSE  
button  
CD STOP button  
Open the disc  
door by lifting here  
SKIP/SEARCH  
buttons  
Phones  
jack  
PAUSE symbol  
Volume control  
FM/AM/CD  
function switch  
Tip  
When the CD play  
is paused, the  
display will show the  
To  
Press or Adjust  
Volume Control  
STOP  
Adjust the volume  
Stop playback  
pause symbol “  
and no music will  
play.  
To resume play,  
press the PLAY/  
PAUSE button again.  
PLAY/PAUSE  
Display will show the pause  
Pause playback  
symbol “  
during pause.  
Press again to resume play.  
Remember to slide  
Go to the next track  
SKIP/SEARCH  
FORWARD  
the  
BUZZER/  
A U T O / O F F / O N  
switch to BUZZER  
or AUTO position  
after listening, so  
that the buzzer  
alarm, CD music or  
radio will wake you  
up at your preset  
time. Make sure the  
volume control is  
Go back to the previous  
track  
SKIP/SEARCH  
BACKWARD  
or  
while playing, press  
Locate a point in a song  
and hold down until you find the  
point you want in a song.  
Insert your headphones (not  
included) into the PHONES  
jack (at the right side of the set).  
Remember to unplug the  
headphones if you want the set  
to wake you up in the morning.  
To enjoy the music  
without  
others  
disturbing  
adjusted  
loud  
enough to wake you  
up. If you want to  
listen to the CD for  
a short time, simply  
press the SLEEP  
button. See page 12  
Press the STOP button first,  
then lift the CD door.  
Remove the CD  
Press the CD STOP button, then  
slide the BUZZER/AUTO/OFF/  
ON switch to OFF position.  
for  
full  
sleep  
Turn off the CD player  
instructions.  
6
IB-CDR1906(AD-CL)-WM-E-012105  
IB-CDR1906(AD-CL)-WM-E-012105.pmd  
7
2/3/2005, 12:08 PM  
5. Playing CD tracks repeatedly (Repeat Play)  
PLAY/PAUSE  
STOP button  
PROGRAM/REPEAT  
button  
button  
SKIP/SEARCH  
buttons  
BUZZER/AUTO/  
OFF/ON switch  
(on the left side)  
FM/AM/CD  
function switch  
1. Slide the FM/AM/CD FUNCTION switch to CD position and the BUZZER/AUTO/  
OFF/ON switch to ON position.  
2. Select the track by pressing SKIP/SEARCH buttons, and then press PLAY/PAUSE  
button.  
3. Press the CD PROGRAM/REPEAT button.  
Press (during play)  
Display shows  
To repeat  
Press the PROGRAM/REPEAT  
button once, REPEAT 1 will show  
in the display.  
a single track (song)  
REPEAT  
1
Press the PROGRAM/REPEAT  
button twice, REPEAT ALL will  
show in the display.  
all the tracks (all  
songs)  
REPEAT ALL  
During the programmed play,  
press the PROGRAM/REPEAT  
button twice, the symbols  
PROGand REPEAT ALLwill  
show in the display.  
all the programmed  
tracks  
PROG  
REPEAT ALL  
To cancel Repeat Play  
Press the PROGRAM/REPEAT button until the words REPEAT 1 or REPEAT ALL  
disappear.  
7
IB-CDR1906(AD-CL)-WM-E-012105  
IB-CDR1906(AD-CL)-WM-E-012105.pmd  
8
2/3/2005, 12:08 PM  
6. Playing CD in programmed or random order  
1. Programmed Play  
You can make a program of up to 20 tracks in the order you want them to be played.  
PLAY/PAUSE  
RANDOM button  
STOP button  
button  
PROGRAM/REPEAT  
button  
SKIP/SEARCH  
buttons  
BUZZER/AUTO/  
OFF/ON switch  
(on the left side)  
FM/AM/CD  
function switch  
1. Slide the BUZZER/AUTO/OFF/ON switch to ON position and  
the FM/AM/CD FUNCTION switch to CD position. Wait until  
the total track number shows in the display and the CD disc is  
not rotating.  
PROG  
2. Press the PROGRAM/REPEAT button. The letters PROG”  
will show and two zeros “  
will flash.  
3. Press SKIP/SEARCH buttons  
or  
to select the tracks  
you want to program in the order you want.  
4. Press the PROGRAM/REPEAT button to confirm. The two  
PROG  
zeros “  
will flash for your next selection of the track.  
5. Repeat steps 3 and 4. You can program up to 20 tracks.  
6. Press to start programmed play. The letters PROG”  
will show in the display.  
To change the current program  
Just create a new program following the programming procedure.  
To cancel Programmed Play  
Press the STOP button to stop the programmed play. The programmed memory will  
be lost only when the BUZZER/AUTO/OFF/ON switch is slided to OFF position or  
the CD door is opened.  
2. Random Play  
To play the songs in random order  
During play or in STOP mode, press the CD RANDOM button,  
the letters RANDwill show in the display, and the set will play  
RAND  
all the tracks in random order.  
Press SKIP/SEARCH  
button to skip to the next random song.  
To resume normal play  
Press the CD RANDOM button again, the letters RANDwill disappear.  
8
IB-CDR1906(AD-CL)-WM-E-012105  
IB-CDR1906(AD-CL)-WM-E-012105.pmd  
9
2/3/2005, 12:08 PM  
7. Listening to the radio  
RIGHT SIDE VIEW  
LEFT SIDE VIEW  
TUNING FM/AM/CD  
ALARM  
switch  
VOLUME PHONES  
BUZZER/AUTO/  
OFF/ON switch  
control  
switch  
control  
jack  
Connect the supplied AC power cord (see Setting the Clock).  
AM  
FM  
CD  
1
2
Slide the FM/AM/CD switch to AM or  
FM position and the BUZZER/AUTO/  
OFF/ON switch to ON.  
OFF  
AUTO  
ON  
BUZZER  
Tune into the station you prefer using  
the TUNING control. Adjust for the  
clearest sound. The display will show  
you the frequency of the station tuned  
in. This is useful when you know the  
stations frequency.  
FM  
TUNING  
MHz  
MAX  
MIN  
Adjust the VOLUME control for  
desired loudness.  
3
4
OFF  
ON  
AUTO  
Slide the BUZZER/AUTO/OFF/ON  
switch to OFF position to turn off the  
radio.  
BUZZER  
NOTE:  
This set uses an analog (rotary) tuner with a digital display. The digital display is  
very useful when locating your favorite station and also assists you to pinpoint  
the exact tuning frequency. This set does not have radio memory presets.  
Remember to slide the BUZZER/AUTO/OFF/ON switch to BUZZER or AUTO  
position after listening, so that the buzzer alarm, CD music or radio will wake  
you up at your preset time. Make sure the volume control is adjusted loud  
enough to wake you up. If you want to listen to the radio for a short time, simply  
press the sleep button. See page 12 for full sleep instructions.  
9
IB-CDR1906(AD-CL)-WM-E-012105  
IB-CDR1906(AD-CL)-WM-E-012105.pmd  
10  
2/3/2005, 12:08 PM  
8. More about radio operation  
PHONES  
jack  
FM ANTENNA  
BATTERY  
COMPARTMENT  
(at the bottom of the set)  
To improve broadcast reception  
Fully stretch out the FM ANTENNA for better FM reception.  
Reorient the player itself for better AM reception.  
Or locate the set near a window.  
To listen without disturbing others  
Connect your headphones (optional - not included) into the PHONES  
jack at the  
right side of the set. The speakers will automatically be silenced. Remember to  
unplug the headphones if you want the set to wake you up in the morning.  
To use battery backup  
Install a 9V battery for Clock backup, so that if your home power is momentarily off  
due to a power outage, you will not have to set up the time & alarm settings.  
NOTE: During power outages the CLOCK display will not show the time but the time  
will be kept in memory and will reappear when power is restored.  
10  
IB-CDR1906(AD-CL)-WM-E-012105  
IB-CDR1906(AD-CL)-WM-E-012105.pmd  
11  
2/3/2005, 12:08 PM  
9. Waking up to alarm or music  
NOTE:When the BUZZER/AUTO/OFF/ON switch is set to ON or OFF position, the  
words ALARM 1or ALARM 2will not show in the display and no alarm  
buzzer, CD music or radio will come out at the set alarm time.  
1. Waking up to alarm  
1. Set the BUZZER/AUTO/OFF/ON switch to  
OFF  
AUTO  
BUZZER position.  
2. Set the alarm time as previously instructed  
ON  
BUZZER  
and slide the ALARM switch to ALARM 1,  
ALARM  
2
or ALARM 1+2, the proper  
2
1+2  
1
ALARM status will show in the display.  
Alarm buzzer will sound at the set alarm time.  
ALARM  
2. Waking up to CD  
1. Set the BUZZER/AUTO/OFF/ON switch to  
AUTO position.  
OFF  
AUTO  
2. Set the alarm time as previously instructed  
and slide the ALARM switch to ALARM 1,  
ON  
BUZZER  
ALARM  
2
or ALARM 1+2, the proper  
ALARM status will show in the display.  
2
1+2  
1
3. Make sure the FM/AM/CD switch is set to  
CD position.  
4. Make sure there is a CD disc loaded in the  
compartment and the volume setting is  
loud enough to wake you up.  
ALARM  
AM  
FM  
CD  
The CD Disc will start playing from the first  
track at the set alarm time.  
3. Waking up to radio  
1. Refer to Listening to the radio for radio  
operation instructions. Select the desired AM  
or FM band using the FM/AM/CD switch and  
TUNING control. Adjust the volume control  
to your preference.  
OFF  
AUTO  
ON  
BUZZER  
2
2. Set the BUZZER/AUTO/OFF/ON switch to  
AUTO position.  
1+2  
1
3. Set the alarm time as previously instructed  
and slide the ALARM switch to ALARM 1,  
ALARM 2 or ALARM 1+2, the proper ALARM  
status will show in the display.  
ALARM  
AM  
FM  
CD  
4. Set the FM/AM/CD switch to FM or AM position.  
The radio will start playing at the set alarm time.  
11  
IB-CDR1906(AD-CL)-WM-E-012105  
IB-CDR1906(AD-CL)-WM-E-012105.pmd  
12  
2/3/2005, 12:08 PM  
10. Snooze and Sleep functions  
When alarm or music comes on  
1. To sleep extra 7 minutes  
SNOOZE  
Just press the SNOOZE button, the alarm or music will stop  
and come on after 7 minutes.  
ALARM  
SLEEP/OFF  
2. To stop the alarm buzzer, CD music or radio  
Just press the ALARM/SLEEP/OFF button, the alarm  
buzzer, CD music or radio will stop and come on next day.  
OFF  
AUTO  
3. To off the alarm function  
Just slide the BUZZER/AUTO/OFF/ON switch to OFF  
position.  
ON  
BUZZER  
Going to Sleep with CD music  
The SLEEP control will allow the set to play 59 minutes (or 1 hour and 59 minutes)  
before the set turns itself off.  
1. Slide the FM/AM/CD switch to CD position.  
2. Slide the BUZZER/AUTO/OFF/ON switch to BUZZER or AUTO position.  
3. Press the SLEEP button, the display will show 59 minutes and the word SLEEP,  
the CD will start to play.  
4. Holding the SLEEP and MINUTE buttons down, the display will count down.  
Release the buttons when the display shows your desired amount of time you  
want the CD to play before shutting itself off.  
5. Pressing the SLEEP and HOUR buttons simultaneously down, will change the  
sleep time to 1 hour and 59 minutes. You may reduce the sleep time by following  
the above Step 4.  
6. To turn the CD off before the playing time has expired, simply press the ALARM/  
SLEEP/OFF button.  
Going to Sleep with RADIO  
The SLEEP control will allow the set to play 59 minutes (or 1 hour and 59 minutes)  
before the set turns itself off.  
1. Slide the FM/AM/CD switch to AM or FM position.  
2. Slide the BUZZER/AUTO/OFF/ON switch to BUZZER or AUTO position.  
3. Press the SLEEP button, the display will show 59 minutes and the word SLEEP,  
the RADIO will start to play.  
4. Holding the SLEEP and MINUTE buttons down, the display will count down. Release  
the buttons when the display shows your desired amount of time you want the  
RADIO to play before shutting itself off.  
5. Pressing the SLEEP and HOUR buttons simultaneously down, will change the  
sleep time to 1 hour and 59 minutes. You may reduce the sleep time by following  
the above Step 4.  
6. To turn the RADIO off before the playing time has expired, simply press the  
ALARM/SLEEP/OFF button.  
12  
IB-CDR1906(AD-CL)-WM-E-012105  
IB-CDR1906(AD-CL)-WM-E-012105.pmd  
13  
2/3/2005, 12:08 PM  
Precautions  
On safety  
On power sources  
As the laser beam used in the CD  
player section is harmful to the eyes,  
do not attempt to disassemble the  
casing. Refer servicing to qualified  
personnel only.  
For battery backup, you may use a 9V  
battery (optional), so that you will not  
have to re-set the clock every time you  
disconnect the power.  
The nameplate indicating operating  
voltage, power consumption, etc. is  
located at the bottom of the set.  
Should any solid object or liquid fall into  
the player, unplug the player, and have  
it checked by qualified personnel  
before operating it any further.  
On operation  
If the player is brought directly from a  
On placement  
cold to a warm location, or is placed in  
a very damp room, moisture may  
condense on the lens inside the CD  
player section. Should this occur, the  
player will not operate properly. In this  
case, remove the CD and wait about  
an hour for the moisture to evaporate.  
Do not leave the player in a location  
near heat source, or in a place subject  
to direct sunlight, excessive dust or  
mechanical shock or vibration.  
Do not place the player on an inclined  
or unstable place.  
This CD player is designed to be played  
Do not place anything within 1 inch of  
on a stable no vibration position. If you  
bump the set during CD play, the music  
will stop or skip for a few seconds. This  
is normal for this type of player.  
the back of the cabinet. The ventilation  
holes must be unobstructed for the  
player to operate properly and prolong  
the life of its components.  
If you have any questions or problems  
Since a strong magnet is used for the  
concerning your player, please contact  
speakers, keep personal credit cards  
using magnetic coding or spring-  
wound watches away from the player  
to prevent possible damage from the  
magnet.  
our customer service department.  
13  
IB-CDR1906(AD-CL)-WM-E-012105  
IB-CDR1906(AD-CL)-WM-E-012105.pmd  
14  
2/3/2005, 12:08 PM  
Precautions (continued)  
Cleaning the lens  
Notes on CDs  
If the lens becomes dirty, it may cause a  
skipping of sound during CD operation.  
Clean with a commercially available lens  
cleaner blower or a cotton swab.  
Before playing, clean the CD with a  
cleaning cloth. Wipe the CD from the  
center out.  
Do not use solvents such as benzine,  
thinner, commercially  
available  
cleaners or anti-static spray intended  
for vinyl LPs.  
Do not expose the CD to direct sunlight  
or heat sources such as hot air ducts,  
nor leave it in a car parked in direct  
sunlight as there can be a considerable  
rise in temperature inside the car.  
Cleaning the cabinet  
Do not stick paper or sticker on the  
CD, nor scratch the surface of the CD.  
Clean the cabinet, panel and controls with  
a soft cloth slightly moistened with a mild  
detergent solution. Do not use any type  
of abrasive pad, scouring powder, or  
solvent, such as alcohol or benzine.  
After playing, store the CD in its case.  
If there is a scratch, dirt or fingerprints  
on the CD, it may cause tracking error.  
14  
IB-CDR1906(AD-CL)-WM-E-012105  
IB-CDR1906(AD-CL)-WM-E-012105.pmd  
15  
2/3/2005, 12:08 PM  
Trouble Shooting  
Remedy  
Problem  
Connect the AC power cord to a wall outlet  
securely. Make sure that outlet has power.  
The power is not on.  
Make sure the FUNCTION switch is at the  
right position as you want.  
Adjust the volume.  
Unplug the headphones when listening  
through speakers.  
There is no sound.  
AM or PM is not set correctly. Is alarm time  
set in AM range (PMshould disappear from  
the display)?  
BUZZER/AUTO/OFF/ON switch is not set to  
the proper position. Does the ALARMshow  
in the display?  
Alarm does not come on in  
the morning.  
appears in the display  
Insert the CD with the label side up.  
even when a CD is in place.  
Make sure that the CD compartment is closed.  
Place the CD with the label side up.  
CD play is paused, press  
again.  
Clean the CD or try another compact CD,  
this set will not play MP3 or WMA discs.  
Replace the disc (this set will not play  
damaged or scratched CDs), or buy a disc  
repair polisher to repair it yourself.  
CD does not play.  
Take out the CD and leave the CD door open  
for about an hour to dry moisture condensation.  
Make sure the FM/AM/CD switch is at CD  
position.  
Make sure the BUZZER/AUTO/OFF/ON  
switch is at the proper position.  
Clean the CD, or replace it if the CD is badly  
damaged.  
The sound drops out.  
Place the player in a location free from  
vibration.  
Fully stretch out the FM antenna to improve  
FM reception.  
Bring the set near a window, or rotate the set  
for AM reception.  
The sound is weak or has  
poor quality.  
15  
IB-CDR1906(AD-CL)-WM-E-012105  
IB-CDR1906(AD-CL)-WM-E-012105.pmd  
16  
2/3/2005, 12:08 PM  
Specification  
GENERAL DESCRIPTION  
Power source:  
Speakers:  
AC 120V, 60Hz, DC 9V (optional - for clock backup)  
38 ohm  
1.5W/channel  
Output power:  
Dimensions:  
Width:  
Depth:  
6 1/2”  
8 1/4”  
Height: 5”  
Weight: 3.4 LBs (without battery)  
CD SECTION  
Plays disc type:  
Laser wavelength:  
Tracking method:  
Any compact discs bearing this logo  
760 - 800 NM  
3 - spot error detection 3.86 mm lens  
Frequency response: 50 Hz - 15 kHz (+1/-2dB)  
NOTE: This CD player will play normal music CDs (or CD-R/CD-RW CDs).  
RADIO SECTION  
Frequency range:  
FM: 88 - 108 MHz  
AM: 530 - 1700 kHz  
LENOXX reserves the right to make design and specification changes for product improvement.  
PROTECT YOUR FINE FURNITURE!  
WE RECOMMEND A CLOTH OR OTHER PROTECTIVE MATERIAL BE PLACED UNDER THE SET  
WHEN PLACING IT ON SURFACE WITH A NATURAL OR LACQUER FINISH.  
LIMITED WARRANTY  
We warrant this product to be free from defects in material and workmanship under normal use  
for a period of 90 days after purchase and we will repair it free of charge or replace it at no charge,  
should it become defective under this warranty, providing you submit proof of purchase (sales slip)  
with the set.  
During the initial 90 day period after original purchase, we will service or exchange, at no charge,  
the set that is returned to LENOXX ELECTRONICS CORP. After the initial 90 day period expires, and for  
a period of 12 months from original purchase, we will repair the unit covering any part(s) that need to be  
replaced at no charge, but will charge for the cost of labor, return postage paid by Lenoxx.  
This warranty does not apply to any products which have been subject to misuse, neglect or  
accident. This warranty does not cover broken cord or cabinet. UNDER NO CIRCUMSTANCES  
WILL LENOXX ELECTRONICS CORP. BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL  
DAMAGES. Some states do not allow the exclusion or limitation of incidental or consequential  
damages, so the above limitations or exclusions may not apply to you.  
This warranty gives you specific legal rights, and you may also have other rights which vary  
from state to state. The following charges apply to repairs beyond the warranty period: $12.00. Be  
sure to pack carefully and return postage paid insured together with your money order (personal  
checks will not be accepted) and sales receipt to:  
LENOXX ELECTRONICS CORP., 2 GERMAK DRIVE, CARTERET N.J. 07008  
For customer service  
Dial 1-800-315-5885 (MONDAY - THURSDAY 9:00 AM - 5:00 PM, FRIDAY 9:00 AM - 1:00 PM EST)  
or Visit Our Website: http://www.lenoxx.com  
© 2005 LENOXX ELECTRONICS CORP.  
2 GERMAK DRIVE  
CARTERET, N.J. 07008  
MADE & PRINTED IN CHINA  
16  
IB-CDR1906(AD-CL)-WM-E-012105  
IB-CDR1906(AD-CL)-WM-E-012105.pmd  
17  
2/3/2005, 12:08 PM  

Motorola NULL A630 User Manual
Morphy Richards Cafe Rico Espresso coffee maker User Manual
Marantz CD6000SE User Manual
Lindy 20698 User Manual
Kompernass KH 2214 User Manual
HP Hewlett Packard SureStore 7215w User Manual
Curtis CR1274UK User Manual
Black Box Computer Accessories ServSwitch Video Switch User Manual
Asus Mini Bluetooth Dongle USBBT211 User Manual
APC InRow ACRC100 User Manual